Products
PLC Setting
KEYENCE KV-5000 series Ethernet configuration.
To communicate with KV-5000 by Ethernet, It is necessary to configure the communication setting by KV STUDIO(KEYECNE'S Programing tool).
Network environment
This sample assume the following cases.
* You can scroll this table sideways.
Host IP address | 192.168.0.2 |
---|---|
Host Port number | 0 |
PLC IP address | 192.168.0.1 |
PLC Port number | 8501 |
Explanation
- Open the unit editor of KV STUDIO, and you drag and drop "KV-LE20A" or "KV-LE20V" in the unit selection tab.
- It is not necessary to configure the communication setting in KV-5000(CPU Built-in Ethernet Port).
IP address and port number
Configure the Ethernet parameters such as IP address and port number etc. by the screen of unit setting.
Communication parameter
Explanation
- Configure IP address and port number in the property dialog.
- MITSUBISHI MELSEC
- OMRON SYSMAC
- JTEKT TOYOPUC
- YOKOGAWA FA-M3
- HITACHI HIDIC
- SHARP SATELLITE
- FUJI MICREX
- PANASONIC FP
- YASKAWA MP
- KEYENCE KV
- TOSHIBA PLC
- AZBIL CPL
- IAI CONTROLLER
- ROCKWELL AB
- SIEMENS SIMATIC
- GE PLC
- Saia PLC
- LSIS XGT
- MODBUS
- FANUC CNC
- MITSUBISHI CNC
- MITSUBISHI EDM
- KAWASAKI ROBOT
- YASKAWA ROBOT
- YAMAHA ROBOT
- SHIBAURA MACHINE
- Sumitomo Heavy Industries - Molding Machine
- The Japan Steel Works - Molding Machine
- DPRNT
- MTConnect
- BACnet
- EtherNet/IP
- MITSUBISHI RFID
- OMRON RFID
- JCC AE sensor
- COGNEX BCR
- KEYENCE BCR
- MARS TOHKEN BCR
- MITSUBISHI ECO
- IEC61850 MMS Client
- IEC60870-5-104
- DNP3
- OPC DA CLIENT
- OPC UA CLIENT
- OPC UA SUBSCRIBER
- ODBC CLIENT
- DDE CLIENT
- DxpLink CLIENT
- Modbus/TCP Server
- SHARED MEMORY