|
The SYSMAC OPC Server supports OPCDA3.0 and each SCADA or VC/VB application can access it. Please use to standardize application interface.
It supports OMRON PLC, SYSMAC-CS1 series, SYSMAC-CV series and SYSMAC-C series with FinsGateway.
|
|
Main Window |
|
|
Port Configuration |
When communicating directly with the Serial or Ethernet without using FinsGateway, the parameter of the communication port is set. When Ethernet is used, The MELSEC OPC Server supports multiple Ethernet adapter and both protocol TCP/IP and UDP/IP. In the case of using multiple adapter, it is able to select some adapter in adapters list on computer. The DHCP system that dynamically allots IP address can be used.
When communicating with FinsGateway, IP address or communication parameter should be configured on FinsGateway.
|
|
Device Configuration |
In 'Device Configuration', it will be configured for physical device, network address or PLC types or something else. In simulation mode, it will be returned random data and provide smooth debug work without PLC.
When communicating with FinsGateway, it will be configured for network number, node number and unit number of PLC.
|
|
TAG Configuration |
This will link TAG name and PLC device name. The tag has some data type, double word, string, bit and you will be able to select any type for each TAG. Normally, it is not necessary work to register all items because TAG is registered by client application. It is used with scale configuration or device monitor.
|
|
Appendix |
# Supported multiple LAN adapter.
# Supported word, double word, string, float, array type of data.
|
|
DXP Ver3x Top
Datasheet
SYSMAC
Manual/Demo
Online Catalog
