|
The FA-M3 OPC Server supports OPCDA3.0 and each SCADA or VC/VB application can access it. Please use to standardize application interface.
It supports YOKOGAWA PLC 'FA-M3(R)' with Ethernet module and personal computer module and CPU module. In additional to asynchronous communicate mode, it will supply high speed response.
|
|
Main Window |
|
|
Port Configuration |
When Ethernet is used, The FA-M3 OPC Server supports multiple Ethernet adapter and both protocol TCP/IP and UDP/IP. In the case of using multiple adapter, it is able to select some adapter in adapters list on computer. The DHCP system that dynamically allots IP address can be used.
When serial is used, the parameter in communication tools of the baud rate and parity, etc. is set.
|
|
Device Configuration |
In 'Device Configuration', it will be configured for physical device, network address or PLC types or something else. 'Async Access' is the high speed mode. In simulation mode, it will be returned random data and provide smooth debug work without PLC.
|
|
TAG Configuration |
This will link TAG name and PLC device name. The tag has some data type, double word, string, bit and you will be able to select any type for each TAG. Normally, it is not necessary work to register all items because TAG is registered by client application. It is used with scale configuration or device monitor.
|
|
Appendix |
# Supported multiple LAN adapter.
# Supported TCP/IP and UDP/ID.
# Supported word, double word, string, float, array type of data.
# Supported asynchronous communication.
|
|
DXP Ver3x Top
Datasheet
FA-M3
Manual/Demo
Online Catalog
