Support MP

• PLC maker
• MITSUBISHI
• OMRON
• JTEKT
• YOKOGAWA
• HITACHI
• SHARP
• FUJI
• PANASONIC
• YASUKAWA
• KEYENCE
• AB
• SIEMENS
• FANUC
• MODBUS
• OPCDA

Support MP2000/MP900
DeviceXPlorer can connect to machine control MP2000 series/MP900 series by Ethernet connection.

MEMOBUS Protocol
DeviceXPlorer supports MEMOBUS protocol based on MODBUS. It is possible to communicate by ASCII-code or Binary-code.

Extended MEMOBUS
Ethernet module of MP2000 uses Extended MEMOBUS command. By Extended MEMOBUS, DeviceXPlorer can access many points at one time.The performance improvement of the entire system can be attempted by using Extended MEMOBUS command.

Word swap
It is possible to swap the high and low words when accessing LONG, LONGLONG, FLOAT or DOUBLE data.



Access to another station
It is possible to access another station by specifying "slave ID" of Ethernet module.


4 types of device
DeviceXPlorer can access Input Relay(IB), Output Relay(MB), Input Register(IW), Holding Register(MW).

  Applicable Units CPU models and the Ethernet unit models that the OPC server is supported.

  Performnce A measurement of communication performance between OPC server and PLC.

  Ethernet unit setting Explanation of Ethernet unit setting with PLC.