FANUC PMC Performance
PMC series Ethernet communication
Communication Performance
Results
Explanation
Interface performance
Results of measurement of each interface(eg.sync /async /datachange event etc).
(detail)
FANUC PMC Setting
PMC series Ethernet configuration
Ethernet parameters of IP address and the Port number, etc. are set by using the setting of the Ethernet parameter of FANUC PMC screen.
Network Environment
This sample assume the following cases.
IP Address:192.168.1.1
TCP Port number:8190
Explanation
- FANUC PMC is made MDI mode, and function key "SYSTEM" is pushed.
- "Ethernet parameter screen" is displayed when pushing as "Continuance menu" ->"ETHPRM".
- Configure parameters by pushing "Internal" key in case of "Built-in port" and by pushing "PCMCIA" key in case of PCMCIA Ethernet card.
IP Address
IP address, the subnet mask, and the router address are set on the screen in a right picture.
Port number
The screen is switched to a right picture with page key, and an appropriate port number is set.
Explanation
- Ethernet parameters of IP address and the port number, etc. are changed pushing the MDI key.
