|
| |
First |
To support the introduction work to the user, this release note offers new function information and trouble information.
|
| ------ |
ALL |
Modified resource by Company Name changed |
| 1110520 |
ALL |
The phenomenon that might shift the following register and be written is improved when poking the value of 100000 or more to the tag with ".A" format. |
| ------ |
ALL |
Support Windows Server 2003 |
| 1110300 |
ALL |
Deals with the problem in 2038. |
| 1110301 |
Ethernet |
Corresponds to the MAX segment function added to the MELSEC Ethernet unit |
| 1110305 |
Ethernet |
Corresponds to the KeepAlive function added to the MELSEC Ethernet unit |
| 1110303 |
Ethernet |
Fixed the maximum of MELSEC Q series Bit Read points and A Series Batch Poke points |
| 1110304 |
Ethernet |
The default value of the port is changed to UPD/IP and port 5000 |
| 1110306 |
IBoard |
Corresponds to Random Poke of the bit device |
| 1110200 |
IBoard |
When accessing the bit device, the phenomenon to refer to an improper device number is improved |
| 1110180 |
ALL |
Supported with process CPU(Q12PH/Q25PH) and basic model CPU(Q00J/Q00/Q01) |
| 1110184 |
ALL |
Fixed the physical port does not OPEN at the simulation mode. |
| 1110189 |
ALL |
The optimization processing of the message construction is added |
| 1110190 |
ALL |
Special item "DATE" and "TIME" are added |
| 1110191 |
ALL |
When "-32768" is written in ASCII format, the phenomenon clamped to "-32767" is fixed. |
| 1110193 |
ALL |
The maximum in port number is enhanced to 256. |
| 1110194 |
ALL |
The phenomenon that can be accessed improper device name "Exxx" is improved. |
| 1110196 |
Ethernet
/Serial
/EZSocket |
The sequential number access of the MELSEC enhancing file register (device 'ZR') is supported. |
| 1110160 |
ALL |
The phenomenon that it might not be normally written since the second point is improved when writing it in two or more point device in ASCII format |
| 1110161 |
HIDICH |
When the communication timeout error occurs, the phenomenon to repeat Ritorai infinitely is improved. |
| 1110162 |
HIDICH |
When the connection begins, the phenomenon that might not be able to be connected is improved
|
| |
Ver3.32a - 2002 Jun.-Jul. |
| 1110150 |
Serial |
The phenomenon that the value might not be able to be written normally is improved when continuously writing it in the device in Q series I/O Server |
| 1110151 |
HIDICH |
The phenomenon that might not be able to be connected with PLC is improved. |
| 1110130 |
ALL |
Compatible Windows XP |
| 1110131 |
ALL |
When DDE manual operations are linked while the time-out error is occurring, the phenomenon of the symbol's remaining of DDE automatic a link is improved |
| 1110132 |
ALL |
The phenomenon that might overflow with writing ASCII format is improved. |
| 1110133 |
Ethernet/HIDIC |
After the communication error occurs, the phenomenon the Retry frequency's being likely being likely to become one time is improved. |
| 1110112 |
Ethernet |
The retry frequency of the response time-out is corrected from four times to three times |
| 1110135 |
Ethernet |
The phenomenon to do line CLOSE with Protocol Error is improved |
| ------ |
Serial |
The phenomenon that the value might not be able to be written is improved when continuously writing it in the bit device in Q series I/O Server |
| 1110136 |
HIDIC |
When UDP/IP is used, the phenomenon with the thing that the initialization command is not sent is improved |
| 1110137 |
HIDIC |
When the communication error occurs while issuing the occupation command (CPU type: Excluding enhancement), the phenomenon that might not be reconnected is improved
|
| 1110138 |
HIDIC |
The default value of the reception time-out is changed at 15 seconds from three seconds. |
| ------ |
IBoard |
Corresponds to series made by the Contecc company MELSEC-Q PC CPU unit (PPC-CPU) |
| ------ |
Serial |
It writes and phenomenon that fixed value "4851" is written in an unspecified device when going is improved continuously at high speed by Serial I/O Server V3.30 for A series. (This problem doesn't occur in version, Q series Serial I/O Server other than A series Serial I/O Server V3.30.) |
| 1110121 |
EZSocket |
When DDE automatic link is put from the VB client on Windows 98, the phenomenon dead locked is improved. |
| 1110120 |
Ethernet |
The phenomenon that might fall into the situation that takes time to be reconnected when the line is closed by the influence of the time-out error etc. in the state two or more ports' communicating when TCP/IP is used or is not reconnected is improved. |
| ------ |
ALL |
Corresponds to MELSEC multiple CPU system (The EZSocket version is excluded) |
| 1110100 |
ALL |
To set the external whether to use Randon Poke Function, it improves it |
| ------ |
ALL |
Dialog font is changed |
| 1110101 |
ALL |
The phenomenon of occured the memory leak when writing it in the simulation mode is fixed. |
| 1110102 |
ALL |
The phenomenon that can be written in special item "STATUS" and "ERROR" is fixed |
| 1110105 |
ALL |
The phenomenon that two or more times are displayed to version information in WWLOGGER is fixed |
| ------ |
ALL |
When it accesses an improper item name, the phenomenon that the configuration file might be damaged is fixed |
| 1110107 |
ALL |
The phenomenon that the error code of Winsock is not correctly set is fixed |
| ------ |
IBoard |
The phenomenon that the value of 65536 or more cannot be written in item (.D) of the double word type is fixed |
| 1110108 |
EZSocket |
Change to give priority to Poke Operation more than Read Operation |
| 1110110 |
Serial |
Corresponds to RS232C board (FX1N/2N-232-BD,FX0N-232ADP) of the MELSEC-FX series |
| 1110101 |
Ethernet |
An initial value of the time-out is changed at 15 seconds. |
| ------ |
Ethernet |
Change to set the external of the Retry frequency |
| 1110090 |
ALL |
The phenomenon process being likely to become slow when writing continuous compared with the same device is done by types other than the single word type like the double word type etc. is improved |
| 1110092 |
ALL |
When it writes and the time-out error occurs while processing it, the phenomenon the automatic reading processing's being likely to stop is improved |
| 1110094 |
ALL |
The phenomenon might accept the item character strings other than a predetermined device is improved |
| 1110095 |
ALL |
The phenomenon that it might take time by the time an improper value is set in special item "ERROR" or the value is set is improved |
| 1110096 |
ALL |
The maximum value of the unsigned integer type item is corrected from "65534" to "65535" |
| 1110091 |
Ethernet |
The phenomenon connected test function's being likely being likely not to operate normally when UDP/IP is used is improved |
| 1110093 |
Ethernet |
The phenomenon that might not be connected after the second is improved by connected test function of the topic dialog |
| 1110097 |
Ethernet |
The maximum number of ports is changed from 32 to 64 |
| 1110060 |
ALL |
For random writing(However, only the bit type and the integer type correspond. Only the integer type corresponds to the IBoard version. The EZSocket version non-corresponds) |
| 1110061 |
ALL |
Supports unsigned integer type |
| 1110062 |
Ethernet |
Connected check function addition |
| 1110063 |
ALL |
When the bit writing of the word device is done, the phenomenon that might be accessed an illegal device is improved |
| 1110064 |
ALL |
When a numerical value outside the range is written in hexadecimal number/ASCII at the time of writing, the phenomenon being written for an improper value is improved |
| 1110065 |
ALL |
The phenomenon of an extra comma's adhering to the end is improved by ASCII type item at the simulation mode |
| 1110069 |
ALL |
The default value of UpdateInterval is changed to 500ms |
| 1110070 |
ALL |
Shortcut addition of VB sample and Excel sample with installer |
| 1110071 |
ALL |
Registry setting release of MFC42.DLL |
| 1110072 |
ALL |
Corresponds to Win2000 Dongle driver |
| 1110073 |
ALL |
The operation time of the demo version will be extended in two hours from 30 minutes |
| 1110074 |
ALL |
Corresponds to Unsigned Integer DDE Test Client |
| 1110075 |
ALL |
To install all I/O Server with one installer, the demo version changes. (installation necessity of GX Developer in case of EZSocket version) |
| 1110066 |
Serial |
The phenomenon of the NAK error's happening when the small letter is included is canceled in the place where the hexadecimal is written. (Only A-Z and 0-9) |
| 1110067 |
Ethernet |
The phenomenon that an irregular value is written when characters other than the hexadecimal number are included is canceled |
| 1110068 |
Ethernet |
When two or more LAN adaptors are used, IP address of the board is correct and the phenomenon that might not be recognized is improved |
| 1110043 |
ALL |
Corresponds to MELSEC-Qn all products. (Exclude it for Ver2.xx:InTouch6/5) |
| 1110044 |
ALL |
Attached DDE Server for InTouch6.x/5.x to each product |
| 1110045 |
ALL |
DDE Test Client is renewed. (addition of File Batch Poke Operation) |
| 1110046 |
ALL |
The trouble of effective/invalid setting of TOPIC is corrected |
| 1110047 |
ALL |
The version of MFC42.DLL is improved from "4.21.7022" to "6.00.8267.0", and the installation destination is changed from the system folder to the folder of Windows at the installation destination of I/O Server |
| 1110048 |
Ethernet |
Corresponds up to 960 words the size of the packet |
| 1110049 |
Ethernet |
Sample data appending for GX Developer |
| 1110050 |
Serial |
Change to dual install Serial I/O Server for MELSEC-A and Serial I/O Server for MELSEC-Q/QnA |
| 1110051 |
Serial |
Corresponds up to 960 words or less when the batch is accessed |
| 1110052 |
EZSocket |
On Sale |
| ------ |
IBoard |
Sales of the MELSECNET version are ended, and it begins newly sales of the Interface Board version. (for MELSECNET board/CC-Link board/A-BUS board/A CPU board) |
| 1110030 |
ALL |
The version of MFC42.DLL of the product appending is changed from "6.00.8267.0" to "4.21.7022" |
| 1110032 |
ALL |
Possible to set it so as not to display the confirmation message to the end operation connecting DDE. ("Autoclose=1" and a postscript is added to a pertinent section of win.ini) |
| ------ |
ALL |
The media is changed from FD to CD |
| 1110031 |
ALL |
The phenomenon clamped to 9999 when BCD is written by 32 bits is corrected |
| 1110025 |
Ethernet |
The phenomenon that might not be able to be written normally is corrected at POKE of the bit device |
| 1110010 |
ALL |
Addition of device simulation function |
| 1110011 |
Ethernet |
Two or more LAN adaptors are supported |
| 1110012 |
ALL |
Confirmation message addition to end operation connecting DDE |
| 1110019 |
ALL |
To operate, the environment in which InTouch7.x is not installed changes |
| 1110013 |
ALL |
The special item limitation of the demo version is released. Moreover, to operate for 1024 points of the number of maximum tag and 30 minutes, it changes |
| ------ |
ALL |
The phenomenon that the communication is not refreshed by the window display is corrected |
| 1110014 |
Serial |
The phenomenon that becomes an application error when POKE is done with Serial I/O Server for MELSEC-A at the PLC unconnection is corrected |
| ------ |
Serial |
The error code when the cable is disconnected in serial I/O Server for MELSEC-Q/QnA is corrected |
| 1110015 |
Serial |
The error code is corrected from the hexadecimal mark to a decimal mark with Serial I/O Server for MELSEC-Q/QnA |
| 1110016 |
Serial |
The phenomenon that the station address is not made to effective by Serial I/O Server for MELSEC-Q/QnA is corrected |
| 1110017 |
Ethernet |
The phenomenon of taking time to the reconnecting processing after the line error occurs too much is canceled |
| ------ |
ALL |
Corresnpond with Wonderware SuiteLink |
|
Top Page
Introduction
Release Note
Manual/Demo
