|
|
Introduction of Message I/O Server |
|
Because Message I/O Server becomes a mechanism of always returning the data up-loaded from an external equipment to a high-ranking application by the reception waiting state while general I/O Server becomes a flow of issuing request Den'aya to an external equipment, and receiving the value of the device, a more high-speed communication becomes possible. Both of ACTIVE/PASSIVE TCP/IP, UDP/IP, and the OPEN method are supported as a protocol. |
| |
Main Window |
Only two configuration items of Message I/O Server differ from other I/O Server, and exist. The purpose of this is never to access another station via the Ethernet connection station.
|
| |
Topic Definition |
"TOPIC Definition" A physical parameter like IP address and the port number, etc. on the selection, the PC side, and the PLC side of the protocol is set on the screen. IP address of a primary adaptor is displayed by default, and when two or more LAN adaptors are used, the manual operation of IP address on the personal computer side can be input. When the DHCP system that dynamically allots IP address is used, IP address is allotted with "0.0.0.0".
|
| |
Server Settings |
"Server Setting" The screen does a peculiar setting to I/O Server. It is possible to use like the default setting, and when it starts as a service program that operates even if the customer is not logging in Windows, and the internal processing interval to operate at super-high speed changes, it is possible to set it from this screen in many cases.
|
| |
NOTE |
- Data can be up-loaded from two or more nodes on the network at the same time.
- Two or more LAN adaptors are supported.
- It is possible to use it with TCP/IP and UDP/IP. |
|
Top Page
Message I/O Server
Sample
Manual/Demo
