|
|
Introduction of MELSEC EZSocket I/O Server |
MELSEC EZSocket I/O Server is software corresponding to MELSEC communication component "EZSocket" offered by Mitsubishi. The advantage can be made the best use of enough, Ethernet be started with one set of software, and it access all interfaces of MELSEC such as MELSECNET, CC-Link, and CPU ports. Moreover, it is possible to use it for a wide-ranging usage because it corresponds to micro sequencer FX series.
|
| |
Main Window |
All of each topic are set because there is no communication port setting in the EZSocket version.
|
| |
Topic Definition |
Supported PLC is MELSEC-Q series, A series, and FX series. It corresponds to all routes like CPU port, MELSECNET, CC-Link, and simulation software "GX Simulator", etc. as a physical interface. Because random data is returned in the Debacc environment etc. for which PLC on MELSECNET cannot be prepared when the simulation facilit is checked, the development can be smoothly advanced.
|
| |
Server Settings |
"Server Setting" screen does a peculiar setting to I/O Server. It is possible to use like the default setting, and when it starts as a service program that operates even if the customer is not logging in Windows, and the internal processing interval to operate at super-high speed changes, it is possible to set it from this screen in many cases.
|
| |
NOTE |
- TCP/IP is not supported excluding Q series (The QnA/A series supports only UDP/IP).
- When Ethernet is used, the port on the PLC side etc. are fixed.
- Another station accessing is not supported.
- When CPU port is accessed, the same cable as the one when the ladder is developed is needed.
- The USB connection of the MELSEC-Q series is do not correspond. |
|
Top Page
MELSEC EZSocket
Sample
Manual/Demo
