|
| Introduction of FA-M3 Ethernet DAServer |
DAServer has an advanced function like the hot configuration function and the diagnostic function besides the function to access PLC by a new communication driver that agrees with the ArchestrA technology of the Wonderware.
|
| |
System Management Console (SMC) |
DAServer is a application running in SMC.
Always it was necessary to start each communication driver when it accessed two or more makers' PLC, and the taskbar was always always complex so far.
To solve such a problem, SMC consolidated the communication driver in one united consoles, and was developed as a platform where a common operation was able to be supplied.
|
| |
Port Configuration |
On Port Configuration dialog, you can configure the physical communication interface.
DAServer supports TCP/IP and UDP/IP as protocol, and multiple LAN adapters.
You will use DAServer on DHCP system by setting the own IP Address to "0.0.0.0" so LAN adapter will be detected automatically.
And, DAServer has the redundancy communication function. If the communication line is broken, DAServer keep to communicate by the standby line.
|
| |
PLC Configuration |
You can configure the target PLC information such as CPU type and network address.
|
| |
Topic Definition |
The topic name and update interval will be needed on DDE/SuiteLink communication.
|
| |
TAG Definition |
It is not necesary to define the tag information when using PLC's "device name" such as "D100" or "M50."
But by using TAG Definition, you can standardize the system even if many maker's PLC are in your factory so it is possible to define the alias for each tag.
|
| |
NOTE |
- Supports multiple LAN adapter.
- Supports TCP/IP and UDP/IP.
- Supports as the type of tag, word and string, float, array.
|
|
Top Page
Datasheet
FA-M3 Ethernet
Manual/Demo
